Can You Put Pegs On A Mountain Bike?


Questioning methods to put pegs in your mountain bike? There are such a lot of totally different sorts of mountain bikes on the market, and also you’ve lastly discovered one that matches your price range!

But it surely nonetheless doesn’t have pegs. How do you go about placing them on? What are the correct instruments for the job? And what security precautions must you take? Learn this text for solutions to those questions and extra.

What Are Pegs?

Pegs are footrests that you just connect to your mountain bike that will help you maintain your ft on the bottom and to maintain your steadiness. They’re typically shorter than the precise footrests discovered on some bikes.

Furthermore, they’re usually product of robust steel, and also you set them on prime of the wheels, one on both sides.

Various kinds of pegs generally range in design. For instance, some are product of plastic, whereas others are product of rubber.

The pegs are normally held to the bike by a steel ring. Some footrests have bolted. And others have clamps. Because of this it’s vital to test your bike’s design rigorously before you purchase the pegs.

Questioning How you can Put Pegs on Your Mountain Bike?

For example the idea, let’s take a look at the method of placing pegs on a mountain bike.

1. If in case you have clamps, you’ll need to raise the again tire off the bottom. You are able to do this by leaning the bike towards a wall or fence. Then, you’ll need to loosen the nuts on the again tire.

2. As soon as the nuts are unfastened, you’ll be able to take away the again tire. There shall be two nuts, one on both sides of the again tire. These shall be positioned under the seat, between the seat and the again tire.

3. Subsequent, you’ll need to search out the holes within the body of your bike the place the pegs will connect. You have to to take the pegs you may have bought after which look all the way down to the place the seat and the body meet. There shall be a gap within the body that the peg will match into.

4. Now you’ll need to insert the peg into the outlet of your body. Just remember to have the right peg in your bike. There shall be a peg for a mountain bike, and a peg for a street bike.

5. Whereas the again tire is off the bike, you’ll need to wash the realm the place the again tire sits. You’ll do that with a rag, and a few solvent. This may permit the tire to sit down on the bike with none interference.

6. Once you tighten the again tire, it would be best to watch out. Whether it is too tight, it may trigger the tire to pop off the again of the bike, and will probably be tough to placed on. It’s higher to have the tire too unfastened than too tight.

7. As soon as the again tire is on, you’ll be able to put the seat again on the bike. Then it is possible for you to to experience along with your two new pegs.

8. When you find yourself completed, you could take your bike for a check experience. There may be all the time the prospect that you will want to make a small adjustment.

Furthermore, it’s all the time a good suggestion to test the pegs each time you experience. This may make sure that they’re within the appropriate place.

How you can Select the Proper Peg for Your Mountain Bike?

Quite the opposite, there are a selection of pegs on the market. Subsequently, you need to be cautious when selecting a mountain bike peg. Listed here are some options that will help you discover the correct mountain bike pegs.

1. Color

Select the correct coloration to match the remainder of your bike. It’s good to know which you could additionally paint most pegs.

This may provide the possibility of selecting a coloration that’s bolder. Colour also can enable you spot your bike after a experience, so select one which stands out.

2. Dimension

Measure your mountain bike’s axle diameter. The diameter is a measurement across the axle. That is the diameter for use when selecting the best dimension of your required peg.

After all, you will need to make sure that the pegs you select have the similar outer diameter as your axle.

3. Materials

The fabric of your peg will determine the type of traction it gives. All-purpose rubber is an effective possibility as a result of it supplies traction whether or not your bike is dry or moist.

Some pegs are product of steel that’s normally coated with rubber. This supplies higher traction. To many riders, that is the most suitable choice.

Others go for plastic or fiber-made pegs. These pegs are light-weight and sturdy. They supply much less traction than others however are nonetheless good relying on the floor you experience on.

4. Base

There are pegs which have a small space base and others with a large platform base. The broader the bottom, the extra secure it’s. It’s also simple to get on and get off. Select the bottom that’s most snug for you.

5. Sturdiness

The sturdiness of the peg is vital. You should know if it’ll final for a very long time. You don’t wish to have to purchase one each season.

6. Ease of Use

If the peg is tough to make use of, you’ll discover it annoying and can keep away from utilizing it. There needs to be no challenges in utilizing it. It needs to be simple to put in and take away the pegs.

The pegs needs to be robust and durable. The floor shouldn’t be slippery. You need to have the ability to grip the floor with out slipping and falling.

7. Cable retainer

There are pegs which have a cable retainer. It is a good function as a result of it retains the brake or gear cable. This prevents it from shifting round.

8. Value

You don’t wish to spend some huge cash on a pair of pegs which are going to interrupt or crumble. You wish to know what you might be getting for the cash. You do not need to waste your cash on an inexpensive product that isn’t going to carry out properly.

What Security Precautions Ought to You Take?

Whereas mountain bike pegs are a cool technique to make your bike look distinctive, you need to find out about some vital security precautions.

Earlier than you add pegs to your bike, you need to just be sure you have the correct security gear. This features a helmet and gloves. Padded clothes can be beneficial.

Mountain bike pegs could be slippery, particularly when you find yourself using off-road. That is very true in case you are having to experience over moist or muddy terrain.

These pegs should not the most secure of equipment. In case your bike suggestions over, don’t be shocked if the peg comes unfastened.

When putting in your mountain bike pegs, just be sure you do it correctly. They need to be seated securely and mustn’t wobble once you experience.

When you find yourself attaching them, test to guarantee that the screws won’t come unfastened. Some screws could be overtightened, which can lead to stripping. This may be harmful.

Ensure that the bike pegs you select are the correct dimension in your bike. A peg that’s too large can simply come unfastened.

There are additionally pegs on the market that won’t suit your bike, so measure them earlier than you buy them.

Lastly, take time to select the correct pegs in your bike. This may make sure that they are going to look proper when you find yourself achieved.

Why Would You Wish to Put Pegs on Your Mountain Bike?

Folks add mountain bike pegs to their bikes for a wide range of causes. Some individuals are fascinated about growing the quantity of management that they’ve over their bikes.

When you may have mountain bike pegs, you’ll be able to have a higher sense of steadiness. This may additionally make your bike really feel lighter when you find yourself using.

Different individuals add mountain bike pegs to make it simpler to mount and dismount from their bikes.

Typically, chances are you’ll be in an space the place you’ll be taking your bike off into the woods. With these pegs, you’ll be able to simply get off of your bike and maneuver it over roots and small rocks.

In addition they present extra traction when you find yourself using off-road. Lastly, mountain bike pegs could be present in a wide range of supplies. They arrive in all sizes and shapes as properly.

Subsequently, some individuals add mountain bike pegs only for ornament functions. In the event you really feel that you’ve got a classic cruiser bicycle, for instance, then you definately would possibly wish to add some pegs to your bike to make it look extra genuine.


On this article, we’ve mentioned methods to make a mountain bike, pleasant and protected. We’ve defined why you’d wish to put pegs in your bike and what precautions you need to take when mounting pegs in your bike.

All in all, pegs are a enjoyable addition for anybody that rides off-road and are normally a very simple improve to carry out. It gained’t take you various hours, and also you’ll have the satisfaction of realizing you may have the best bike on the path.

Now, let’s ask an important query of all: How informative this text was for you & Do you may have any additional questions? Please share your ideas within the feedback part.







Leave a Reply

Your email address will not be published. Required fields are marked *